Complete your ViandPro wall cooker hood installation with compatible ducting and recirculation accessories. Choose a 150mm ducting kit for external extraction or replacement carbon filters for selected Cantata, Rhapsody and Forte models. Purpose-matched accessories help you install the hood correctly and maintain effective extraction over time.
Wall Cooker Hood Accessories for Ducting & Recirculation
Choosing the right cooker hood accessory depends mainly on how your wall hood is installed. For external extraction, suitable ducting carries cooking vapours, moisture and odours outside. For recirculation, carbon filters help reduce cooking odours before the filtered air is returned to the kitchen.
<h3>150mm ducting kits for external extraction</h3>
Where a practical route to an outside wall is available, ducted extraction is usually the most direct way to remove cooking vapours from the room. The ViandPro 150mm wall hood ducting kit is designed for compatible cooker hoods and provides the components needed for a complete 3m ducting run.
Keep the duct route as short and smooth as practical and avoid unnecessary bends where possible, as restrictive ducting can reduce airflow and increase noise.
<h3>Recirculation filters for ViandPro wall hoods</h3>
If external ducting is not practical, selected ViandPro wall hoods can be configured for recirculation. The replacement carbon filter pack contains two filters and is compatible with selected Cantata, Rhapsody and Forte cooker hoods.
For best performance, we recommend replacing carbon filters every 3 to 6 months depending on how frequently the cooker hood is used.
<h3>Which wall hood accessory do I need?</h3>
If you are planning a new installation, first decide whether your cooker hood will be ducted outside or used in recirculation mode.
For external extraction, choose suitable 150mm ducting and plan the route before installing the hood. For recirculation, check the exact cooker hood model and select the appropriate replacement carbon filters.
Always check the individual product compatibility information before ordering.
<h3>Wall hood accessory FAQs</h3>
<strong>Do I need ducting or recirculation filters?</strong><br> If your cooker hood is extracting air outside, you will need a suitable duct route. If it is recirculating air back into the kitchen, it will require the appropriate carbon filters.
<strong>Which ViandPro wall hoods use these recirculation filters?</strong><br> The current replacement filter pack is suitable for selected Cantata, Rhapsody and Forte wall cooker hoods. Check the product compatibility information before ordering.
<strong>How often should carbon filters be replaced?</strong><br> We recommend replacing the carbon filters every 3 to 6 months depending on cooking frequency and usage.
<strong>What size ducting should I use?</strong><br> Compatible ViandPro wall cooker hoods are designed to work with 150mm ducting. Keeping the duct route short and avoiding unnecessary bends helps maintain airflow and reduce resistance.
Meta description: Shop ViandPro wall hood accessories including recirculation filters and 150mm ducting kits, designed for compatible cooker hood installations.